PowerGiant 3600
Portable Power Station for Construction Sites

3,600W of rated AC output from a 24kg unit one person carries to the job.
Fully recharged in 2.3 hours and ready for the next shift. Pure sine wave output
that runs tools and sensitive equipment off the same unit.

 

3600W

Rated Power

2.3kWh

Capacity

20kW

Peak Power

>97%

Efficiency

INDUSTRIAL POWER
YOU CAN CARRY.

The PowerGiant 3600 is built for working sites and working conditions. Stable AC power, a frame that takes knocks, and a setup one person can move, deploy, and manage without a support crew.

CLEAN, STABLE
AC OUTPUT

Over 97% efficiency. Pure sine wave at 230V. One unit runs everything.

BUILT FOR
SITE CONDITIONS

IP54-rated. Takes drops and knocks. One person moves it anywhere.

UPDATED WITHOUT
A SERVICE CALL

Firmware updates over Bluetooth. No technician. Managed from your phone.

LIVE OUTPUT
MONITORING

Real-time power, temperature, and capacity over Bluetooth.

POWER DELIVERED
TO THE WORK.

The PowerGiant 3600 is sized for jobs where mobile power makes the difference. Compact enough to reach any floor or access point on site, with enough output to run the tools that matter.

INDOOR CONSTRUCTION

M&E fitout, core drilling, finishing work. Goes up in the goods lift. Operational within minutes.

NIGHT SHIFT MAINTENANCE

Runs under 30dB. No noise, no fumes. Quiet power for tools and lighting through the night.

TUNNELS & UNDERGROUND

Runs drills, pumps, and lighting rigs underground. Fully recharged in 2.3 hours between shifts.

ONE CHARGE.
WHAT IT COVERS.

ARC WELDER 3KW

Pipe and structural steel work, multi-level buildings and tight-access areas

CORE DRILL 3.2KW

Concrete penetration on any floor of a high-rise or commercial building

DRILL 1.4KW

Light fitout, M&E, and anchorage work across an entire floor

ANY 230V AC LOAD

Pure sine wave output runs sensitive motors without interference

WHEN ONE UNIT
ISN'T ENOUGH.

Scale Up, Three-Phase Portable Power for Larger Construction Jobs

THREE-PHASE FROM THREE PORTABLE UNITS

Three units linked deliver 400V/10.8kW rated and 54kW peak. Total capacity 6,912Wh. The PG3600-LINK hub weighs under 6.5kg.

EQUIPMENT KEEPS RUNNING THROUGH TRANSITIONS

Single-phase output switches with a 20ms seamless handover. Tools stay running when one unit needs attention.

SCALE CAPACITY TO THE JOB

One unit: 2,304Wh. All three linked: 6,912Wh total. Break down at end of shift and carry it out the same way it came in.

SAME PORTABILITY AS A SINGLE UNIT

IP54-rated. Operating range -15 to 70°C. Each unit remains one person’s carry, so the linked system goes wherever a single unit goes.
10.8kW
RATED OUTPUT
54kW
PEAK POWER
6.9kWh
TOTAL CAPACITY

KNOW WHAT THE UNIT
IS DOING FROM ANYWHERE.

Live output monitoring

Real-time power, temperature, and remaining capacity over Bluetooth. Useful when the unit is out of sightline.

Usage records per shift

Up to 100 charge and discharge records stored on the unit. Useful for job costing and client reporting.

Fault alerts with action guidance

Instant notification with fault type and recommended action. Cuts diagnostic time on site.

Remote charging adjustments

Adjust charging power without touching the unit. Practical for hard-to-reach positions.

POWERGIANT 3600

Specifications subject to change without notice. Please refer to the latest information from Newpower or Ecovolt.

What it delivers
Rated Output Power 3,600 W
Peak Power 20,000 W
Output 230V Pure Sine Wave
Runtime & Recharge
Capacity 2,304 Wh
Full Recharge Time 2.3 hours
Site Readiness
Weight 23.8 kg
Dimensions (L×W×H) 526×211×485 mm
Protection Rating IP54
Operating Sound <30 dB
Operating Temperature -15°C to 55°C

TELL US WHAT
YOU NEED TO POWER.

We supply and support the PowerGiant 3600 portable power station across Singapore. Tell us about your site and we will work out the right configuration for your job.